picman995+3
Advanced Member
- Joined
- April 20, 2026
- Messages
- 276
- Reaction score
- 2,348
- Points
- 93
- Thread Author
- #1
If ye’ve got yer hands on some hacked IP cams, whether through exploits or tools, here’s the easy way tae get intae them:
Fire up a browser and chuck the cam’s IP intae the address bar, like:
http://151.127.55.187
http://193.251.190.166:8016 (the :8016 bit means it's oan a non-standard port).
Ye’ll likely be asked fur a username an’ password next.
Stuff tae keep in mind:
- Network access: Ye need tae be oan a network that can actually reach the camera; same LAN, or a VPN if remote access is set up.
- Web interface: Maist cams use a wee web page fur settings an’ live feed. HTTP usually works, but some might need HTTPS. Ports like 80, 89, 8016, or 8022 are normally HTTP.
- Browser hassles: Auld cams might need Internet Explorer, some daft ActiveX controls, or even Flash. If the page disnae load, try compatibility mode.
Other ways tae get intae IP cams:
1. RTSP Stream Hijacking (Live feed wi’ no hassle):
Tools: VLC Media Player, FFmpeg, or IP cam apps.
URL format: rtsp://USER:PASS@IP:PORT/STREAM_PATH
Swap STREAM_PATH wi’ common routes like:
/live.sdp
/h264
/ch0_0.h264
/Streaming/Channels/101 (Hikvision)
/cam/realmonitor?channel=1&subtype=0 (Dahua)
2. ONVIF Exploitation (Full access):
Tools: ONVIF Device Manager (Windows), python-onvif (command line).
Scan fur ONVIF services wi’:
Code: nmap -p 80,8899,3702 --script onvif-discovery IP (replace IP with camera IP)
nmap -p 80,8899,3702 --script onvif-discovery IP (replace IP with camera IP)
Use the login details ye’ve got tae:
- Reboot or factory reset the cam.
- Grab RTSP streams even if the web UI is borked.
3. Packet Sniffin' (If ye’re oan the same network):
Tools: Wireshark, tcpdump.
- Snoop the traffic atween a workin’ device (like the owner’s phone) an’ the cam.
- Lift auth tokens or hidden API endpoints links fae the packets.
LINK:
Fire up a browser and chuck the cam’s IP intae the address bar, like:
http://151.127.55.187
http://193.251.190.166:8016 (the :8016 bit means it's oan a non-standard port).
Ye’ll likely be asked fur a username an’ password next.
Stuff tae keep in mind:
- Network access: Ye need tae be oan a network that can actually reach the camera; same LAN, or a VPN if remote access is set up.
- Web interface: Maist cams use a wee web page fur settings an’ live feed. HTTP usually works, but some might need HTTPS. Ports like 80, 89, 8016, or 8022 are normally HTTP.
- Browser hassles: Auld cams might need Internet Explorer, some daft ActiveX controls, or even Flash. If the page disnae load, try compatibility mode.
Other ways tae get intae IP cams:
1. RTSP Stream Hijacking (Live feed wi’ no hassle):
Tools: VLC Media Player, FFmpeg, or IP cam apps.
URL format: rtsp://USER:PASS@IP:PORT/STREAM_PATH
Swap STREAM_PATH wi’ common routes like:
/live.sdp
/h264
/ch0_0.h264
/Streaming/Channels/101 (Hikvision)
/cam/realmonitor?channel=1&subtype=0 (Dahua)
2. ONVIF Exploitation (Full access):
Tools: ONVIF Device Manager (Windows), python-onvif (command line).
Scan fur ONVIF services wi’:
Code: nmap -p 80,8899,3702 --script onvif-discovery IP (replace IP with camera IP)
nmap -p 80,8899,3702 --script onvif-discovery IP (replace IP with camera IP)
Use the login details ye’ve got tae:
- Reboot or factory reset the cam.
- Grab RTSP streams even if the web UI is borked.
3. Packet Sniffin' (If ye’re oan the same network):
Tools: Wireshark, tcpdump.
- Snoop the traffic atween a workin’ device (like the owner’s phone) an’ the cam.
- Lift auth tokens or hidden API endpoints links fae the packets.
LINK: